FEATURES OSCILLATION FREQUENCY STABILIZER The oscillation frequency of this machine is stabilized to an anthorized industrial trequency of 13.56MHZ .Its specification reaches to the INTERNATIONAL AND CHINA TELECONNUNICATLON standard . THE WELDER IS A SOPISTICAFTED DESIGN It is designed on air cylinder motion up-electrode principle which makes the machine trimly fixed .It can be operated or adjusted freely and easily.In xonnection with the above mentioned advatages, the production can standardized with satisfactory result . HIGH AND EFFICIENT OUTPUT POWER This machine adopts lowest loss and high quality factor in cacity resonetor . therefore ,the power output of this machine is particularly strong .It can weld the material in high speed so all the production can be promoted in both quantity and quantity tremendously. SAFETY PROTECTION CIRCUIT When the machine is in operation. If the current exceeds its limit,. The over-current relay will automatically cut-off the power. So the oscillation tubes and rectifier can be protected from damage. If HIGH SPEED ARC SUPPERESSOR and overvoltage suppressor are installed on all machine .It can also prevent the damage of the electrodes an material. MODEL | J-107B | POWER SUPPLY | AC220V | POWER OUTPUT | 1KW | WELDING AREA | 50cm 2 FULLAREA | OSCILLATION FREQUENCY | 30MHZ±5MHZ | LENGTH OF PRESS | 480mm | AREA OF PLATE ELECTRODE | 500×250mm | OVERALL DIMENTINS | 1180×950×1100mm | Notice:The above specifications may be changed for improvement without notice. |
|